Connect your CRM to Paraform (Beta)

Last updated: November 13, 2026

Overview

Connect your agency's CRM or ATS to Paraform so your candidate data flows both ways. CRM integrations are currently in early access, so some details may change.

Once connected, you can:

  • See who's already in your CRM. People in Paraform Search who are already in your CRM are labeled with your CRM's name, and you can filter by them. For example, if you use Bullhorn, the label reads Already in your Bullhorn.

  • Add candidates to a CRM role. Send Paraform candidates straight onto an open role in your CRM.

  • Link a project to your CRM. Keep a Paraform project in sync with a list (or tag) in your CRM, so new candidates flow over automatically.

Supported CRMs

Paraform supports 10 CRMs: Bullhorn, Crelate, JobDiva, Loxo, Manatal, Mysolution, Recruit CRM, RecruiterFlow, Spott and Tracker RMS.

Connect your CRM

Only agency owners can connect or disconnect a CRM. One connection covers your whole agency, so every member benefits once it's set up. If you’re not the owner, you’ll still be able to see the connection status. If the status is Not connected, ask your agency owner to add the connection

  1. Go to Manage → Integrations (paraform.com/manage/integrations).

  2. Click your CRM's card, then click Connect.

  3. Follow the pop-up. Depending on your CRM, you'll either sign in or paste an API key. CRM-specific instructions are shown along the way.

  4. Once finished, the card shows Connected.

Give the first sync some time. The first import of your CRM data can take a while. After that, Paraform checks your CRM for changes about once an hour, so new CRM records may not appear instantly.

Connection status

Status

What it means

What to do

Connected (green)

Everything is working.

Nothing.

Reconnect needed (orange)

Paraform lost access to your CRM. For example, this can happen after a password or API key change.

Click Reconnect.

Not connected

No CRM is connected yet.

Click Connect.

If you see Retry connection, your CRM was authorized but the connection didn't finish saving. Click it to finish connecting.

Disconnect your CRM

On Manage → Integrations, open your CRM's card and disconnect it. You'll be asked to confirm: "Are you sure you want to disconnect your agency's {CRM} integration?"

See who's already in your CRM in Search

In Paraform Search, anyone already in your CRM is labeled Already in your {CRM name}. This helps you avoid re-sourcing people you already know.

To see only these people, use the In CRM filter ("Already in your agency's recruiting CRM").

How matching works: Paraform matches CRM candidates to people in Search by their LinkedIn profile. CRM records without a LinkedIn URL can't be matched and won't be labeled. If a candidate is missing, add their LinkedIn URL in your CRM; the label should appear after the next hourly sync.

Add candidates to a CRM role

Send Paraform candidates directly onto an open role in your CRM, one at a time or in bulk.

Where to find it

  • Candidates table: tick one or more candidates' checkboxes, then click Add to CRM in the action bar.

  • Candidate profile: open the ⋮ (More actions) menu and, under "Add candidate to", click Add to CRM. This option only appears for candidates you own.

  • Project page: click Add all to CRM to send every candidate in the project.

Add candidates

  1. Click Add to CRM from any of the places above. The Add N candidates to CRM dialog opens.

  2. If your agency has more than one CRM connected, choose the CRM.

  3. Search for and pick a Role. Only roles marked as open in your CRM are listed.

  4. Confirm. Candidates are queued and sent to your CRM.

Paraform sends each candidate's first and last name, email (plus any extra emails), phone, LinkedIn URL, current title and current company.

Candidates need an email address. Anyone without one is skipped, and the dialog tells you how many ("X without an email will be skipped").

Track the status

Status shows in the CRM sync column of the Candidates table and in the candidate's profile menu.

Status

What it means

Adding to CRM (blue)

Queued. This usually clears within a minute.

In CRM (green)

Done. If your CRM provides a link to the record, the badge shows a › arrow you can click, and the profile menu shows View in CRM.

Add to CRM failed (red)

Something went wrong. Hover over the badge to see why, then use Retry adding to CRM in the profile menu.

If a candidate stays in Adding to CRM for more than 45 minutes, it switches to Add to CRM failed so you can retry.

Candidates who are already in your CRM

Paraform won't create duplicates. Before adding someone, it looks for an existing record, first by LinkedIn profile and then by email. If it finds one, the candidate keeps their existing record and isn't added twice.

  • Bullhorn: the existing candidate is added to the role you picked.

  • All other CRMs: Paraform links to the existing record but does not add the candidate to the new role. Add them to the role directly in your CRM if needed.

Link a project to your CRM

Link a Paraform project to a list in your CRM and its candidates stay in sync: everyone in the project now is sent over, and anyone you add later syncs automatically.

Set up the link

  1. Open the Paraform project and open the project's menu (button showing ... ).

  2. Click Link to CRM. (You'll only see this if you can rename the project.)

  3. Choose where candidates should go:

    • New CRM list creates a list named "{Project name} (Paraform)".

    • Existing list lets you pick a list you already have.

  4. Confirm. Current project members are sent to your CRM.

CRMs without lists use a tag instead. For RecruiterFlow, Manatal and Tracker RMS, candidates are tagged "Paraform: {Project name}" in your CRM. The dialog tells you: "This CRM has no lists, so a tag stands in."

Each project can be linked by only one agency. If another agency already linked it, you'll see "Another agency already linked this project to its CRM."

Manage a linked project

Once linked, the project menu shows Linked to CRM · {list name}, plus · Paused if sync is paused or · Needs attention if something needs fixing. Click it to open the settings:

Option

What it does

Pause sync

Candidates already in your CRM stay there. New candidates stop syncing.

Add missing

Adds project members not yet in your CRM, whether or not sync is on.

Unlink

Removes the link. Nothing is deleted in your CRM.

CRM-specific notes

Most features work the same across CRMs, with a few differences.

CRM

Project link uses

Notes

Bullhorn

List

The only CRM where a candidate who's already in your CRM is added to the role you pick.

Crelate

List

Only roles whose status counts as open are listed. If you use custom job statuses, some open roles may not appear.

JobDiva

List

Loxo

List

Manatal

Tag

Recruit CRM

List

The In CRM badge links straight to the candidate's record.

RecruiterFlow

Tag

The In CRM badge can't link to the record yet.

Spott

List

Tracker RMS

Tag

Good to know

  • LinkedIn URLs drive matching. CRM records without a LinkedIn URL aren't imported or labeled in Search.

  • Email is required to add candidates. Candidates without an email are skipped.

  • Only open roles appear. Roles your CRM doesn't mark as open won't show in the role picker.

  • Sync isn't instant. The first sync can take a while, then updates run about once an hour.

  • Existing candidates keep their record. Outside Bullhorn, they aren't added to the new role.

  • Duplicates are possible in one case. If a candidate has a different email in Paraform and no LinkedIn URL in your CRM, Paraform can't recognize them and may create a second record.

  • Some badges don't link yet. Not every CRM returns a link to the record. For example, RecruiterFlow doesn't yet.

Troubleshooting

FAQ

I don't see a Connect button. Only agency owners can connect a CRM. Ask your agency owner to connect it on Manage → Integrations.

People in my CRM aren't labeled in Search. Check that their CRM record has a LinkedIn URL; records without one can't be matched. If you just connected, the first sync may still be running. After that, changes show up within about an hour.

A candidate didn't make it to my CRM. Make sure they have an email address. If the badge says Add to CRM failed, hover over it to see why, then click Retry adding to CRM in the profile menu.

My roles don't show up when adding candidates. Only roles marked as open in your CRM are listed. Check the role's status in your CRM.

A candidate already in my CRM wasn't added to the role. This is expected on every CRM except Bullhorn. The candidate keeps their existing record; add them to the role directly in your CRM.

The In CRM badge isn't clickable. Some CRMs, such as RecruiterFlow, don't provide a link to the record yet.

I ended up with a duplicate candidate. This usually happens when the candidate has a different email in Paraform and no LinkedIn URL in your CRM. Adding their LinkedIn URL in your CRM helps Paraform recognize them next time.

Did unlinking a project delete anything? No. Unlinking only removes the connection. Nothing is deleted in your CRM.

Messages you might see

Message

What it means

What to do

No open roles found

Your CRM has no roles marked as open.

Open the role in your CRM, then try again.

Couldn't load roles from your CRM

Paraform couldn't reach your CRM.

Try again. If it persists, check Manage → Integrations.

Your CRM is no longer connected. Reconnect it in Integrations.

Paraform lost access to your CRM.

Ask your agency owner to click Reconnect.

Your CRM was reconnected. Link the project again. / Open the dialog again.

The connection changed while you were working.

Repeat the step.

Every candidate in this project is already in your CRM.

There's nothing new to send.

Nothing.

These candidates are already being added to your CRM.

An add is already in progress.

Wait for it to finish.

Couldn't add N candidates to your CRM. Try again.

The add failed for some candidates.

Retry. If it fails again, hover the red badge for the reason.

{CRM} was authorized but could not be saved. Retry to finish connecting.

Connection didn't finish saving.

Click Retry connection.

{CRM} could not be connected. Start a new connection.

The connection failed.

Click Connect and start over.

Questions, comments, or something not working for you? Reach out to daniela@paraform.com.